Matthew Visyak's Metal DDR Pad Troubleshooting Page


	Metal DDR Pad Maintenance

Overview
How It Works
Routine Care
Trouble Shooting

Listed below are some common conditions and solutions I have discovered that will remedy the situation. Bear in mind that these are general suggestions and they will work for most metal DDR pads.

Just to state a general disclaimer, you are ultimately responsible for your own solution and I accept no responsibility for any damages that occur as a result of following the outlined steps.

Issue	Short Description	Possible Causes	Possible Solutions
Stuck or Shorted Tile	Tile stays active after you step on it. You will notice rapid selections in the game whether or not you are on the tile or not.	•Dirty Contact Plate •Insulation worn away	•Clear debris from the contact plates. •Add extra insulation around the tile.
Non-Responsive Tile	The tile does not register an action if you step on it or only works intermittantly.	•Dirty Contact Plate	•Clear debris from the contact plates.


Site Designed and Maintained by Matthew Visyak		2004 - 2011